Feature:
1. 28pcs of dent & ding puller tab, replacement suckers in different shapes for multiple purposes.
2. Repair the dents on your car.
3. Slide hammer is more powerful for paintless dent repair, conquer big dent.
4. Use widely for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc.

How to use the PDR tools:
1. Clean damage surface with a clean wet cloth
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)(Note: The larger the drawing gasket is, the larger the drawing force is)
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
6. When dent was removal, clear the glue by alcohol with plastic shovel
7. If dent still exists, knock it slightly with a flattening hammer with Tap down head 8 Repeat the operation steps above until the dents are repaired

Package list:
Red Tabs x 10
Blue Tabs x 18
Gold Puller x 1
Rubber Shovel x 2
Glue Gun(US/EU/UK Plug/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5m
White Glue Sticker x 5
Yellow Glue Sticks x 5
Towel x 1
Alcohol Bottle(Alcohol not included) x 1
Tools bag x 1